Mobile Cart Attachments

 

HomeHistoryFAQProductsTo PurchaseContact Us

(if you are unable to access the drop-down menus, scroll to the bottom of page and use menu options there)

 CART ATTACHMENTS FOR MOBILE PHLEBOTOMY CART  

All accessories may be purchased separately so you can configure your own Workstation. Also see our list of pre-configured Phlebotomy Carts with attachments already listed for your convenience. (See Mobile Cart page for description of Cart).   Laboratory Trays are removable from the top of the Cart as needed.

 

 

JAC84 Writing Surface, Blue JAC70 Large Advance Tray

   JAC 84 - Writing Surface

 

Writing Surface for Cart - side mounted, white powder-coated stainless steel, with plastic rim around edge to prevent items from rolling off.  *Highly recommended that you order this item with placement of initial Cart order. Can be ordered separately. 17 x 6.5 inches.

  • contact Distributor for price

Custom Holsters for devices, Blue JAC70 Large Advance Tray

   CUSTOM BRACKETS - to hold Printers, Scanners, or PDAs

 

For your printer, scanner, or other device - attached to upper tray platform as shown or in other configuration as desired. White powder-coated stainless steel or plastic PDA holster from device manufacturer.  Each holster sold separately and can be attached separately on side you request. Inquire.

 

*CUSTOM ORDER - we must have the manufacturer's make/model.  If it hasn't been made before, there will be an extra charge.

  • contact Distributor for price

 JAC85  Small Equipment Basket w/Bracket

  JAC85 - Small Equipment Basket w/Bracket

 

Small Equipment Basket w/Ring Bracket for attaching to Cart. Carry various smaller supplies on your Cart.  White plastic.  

OD 8-3/4 x 6-3/4 x 5-1/4.

ID 7-3/4 x 5-3/4 x 5.

  • contact Distributor for price

 

  JAC86 - Large Equipment Basket w/Bracket

 

JAC86  Large Equipment Basket w/Bracket

Large Equipment Basket w/Ring Bracket for attaching to Cart. Carry various larger supplies on your Cart with easy in-out access. White plastic. 13 x 8 x 5.

  • contact Distributor for price

 

  JAC90 - 14 Qt. Sharps Container Bracket

 

 

14 Quart Sharps Container Bracket for holding your sharps container on the Cart - you supply the sharps container. (not shown)

  • contact Distributor for price

 JAC92  Wastebasket w/Lid and Bracket

  JAC92 - Large Wastebasket* with Lid and Bracket

 

Large White 1-3/4 Gallon Round, Lidded Wastebasket w/Ring Bracket for attaching to Cart.  Use for waste or other misc. supplies on Cart.

(*not meant to be used as a sharps container).

  • contact Distributor for price

JAC93  2-Gallon Sharps Container Bracket

  JAC93 - 2 Gallon Sharps Container Bracket

 

2 Gallon Sharps Container Bracket for holding your sharps container on the Cart - you supply the sharps container.

  • contact Distributor for price

 

  JAC94 - 5 Quart Sharps Container Bracket

 

 

5 Quart Sharps Container Bracket for holding your sharps container on the Cart - you supply the sharps container. (not shown)

  • contact Distributor for price

 

  JAC95 - 1 Gallon Sharps Container Bracket - *CUSTOM ORDER*

 

 

1 Gallon Sharps Container Bracket for holding your sharps container on the Cart - you supply the sharps container. There are several shapes of this size in various brands. * We may need to have you send us a sample of your container for us to make sure we size the correct bracket for it.  As a result, this size is considered a custom order. (not shown)

  • contact Distributor for price

JAC96  1-Quart Sharps Container Bracket

  JAC96 - 1 Quart Sharps Container Bracket

 

1 Quart Sharps Container Bracket for holding your sharps container on the Cart - you supply the sharps container.

  • contact Distributor for price

JAC2005  Small Locking Drawer w/Front Key and Bracket

   JAC2005 - Small Locking Drawer with Front Key, Metal Shelf, and Bracket - (Model DISCONTINUED).  See JAC2014-C or JAC2014-K for upgraded model.

 

Stackable on Cart; front key entry with basic metal latch; metal top shelf, plastic drawer.

 

Can either be attached to Cart Pole by the ring bracket (and repositioned as desired around the pole), or permanently affixed under the Writing Surface on the upper tray platform. (see next photo below)

 

OD measures 11 x 8.5 x 5.

ID drawer measures 9 x 6 x 4.5.  

  • contact Distributor for price

Example of Cart with Deluxe Small Drawer (JAC2014 or JAC2014-K) attached on upper pole under the Writing Surface for easier access.

Additional Drawers or other attachments can be attached to pole beneath drawer.

 

Cart w/Small Deluxe Locking Drawer positioned under JAC84 Writing Surface

JAC2014 Small Deluxe Locking Drawer

   JAC2014-C    DELUXE Small Locking Drawer with Rear COMBINATION Lock, Handle, Rollers, Metal Shelf, and Bracket.  (Replaces JAC2005 model)

 

This drawer is "deluxe" in comparison with the "regular" in that it has a rear combination lock (using three numbers); drawer rollers on metal roller strips for easy, controlled opening with a stop to prevent drawer from pulling/falling out; and a front powder-coated metal handle. (shown stacked on top of the regular Large Locking Drawer).

 

Keeps supplies safe in clinical areas that require extra safety or privacy. (Can also be made with a rear KEY entry - see JAC2014-K).        

OD measures 11 x 8.5 x 5.

ID drawer measures 9 x 6 x 4.5.  

 

Inner Drawer Dividers available for purchase separately (length, width, or both to form "crossover" divider compartments) - not included with drawer. Inquire.

 

Drawer can be positioned along the bottom pole or right under the upper Tray Platform (see example Cart with Drawer).

 

Maximum Drawers per Cart = 3 stacked, so won't obstruct rear lock access.  (It must be accessed from the rear, and the other attachments you order must allow room to access it from behind, near the pole).

  • contact Distributor for price

 

   JAC2014-K    Deluxe Small Locking Drawer with Rear KEY Lock, 2 Keys, Handle, Rollers, Metal Shelf, and Bracket

 

 

(photo not shown - same as above for JAC2014) This drawer is the same as the one above, except that it has a rear KEY lock with 2 keys.  Keep in mind if you order this option that it must be accessed from the rear, and the other attachments you order must allow room to access it from behind without obstruction.  

  • contact Distributor for price

JAC2006  Large Locking Drawer w/Front Key

   JAC2006 - Large Locking Drawer with Front Key, Metal Shelf, and Bracket. MODEL DISCONTINUED.  See JAC2015-C or JAC2015-K for upgraded model.

 

Stackable on Cart; front key entry with basic metal latch; metal top, plastic drawer.  

OD measures 17 x 11.5 x 6.

ID drawer measures 14.75 x 9 x 5.5. 

 

Inner Drawer Dividers available for purchase separately (length, width, or both to form "crossover" divider compartments) - not included with drawer. Inquire.

 

Maximum Drawers per Cart = 6 (this would probably disallow room for other attachments, however).

  • contact Distributor for price

JAC2015  Deluxe Large Locking Drawer

   JAC2015-C    Deluxe Large Locking Drawer with Rear COMBINATION Lock, Handle, Rollers, Metal Shelf, and Bracket (replaces JAC2006 model).

 

This drawer is "deluxe" in comparison with the "regular" in that it has a rear combination lock (using three numbers); rollers on metal roller strips for easy, controlled opening with a stop to prevent drawer from pulling/falling out; and a front powder-coated metal handle.  (Can also be made with a rear KEY entry - see JAC2015-K).    

OD measures 17 x 11.5 x 6.

 ID drawer measures 14.75 x 9 x 5.5. 

 

Inner Drawer Dividers available for purchase separately (length, width, or both to form "crossover" divider compartments) - not included with drawer. Inquire.

 

Keep supplies safe in clinical areas that require extra safety or privacy.

 

Maximum Drawers per Cart = 3 stacked, so won't obstruct rear lock access.  (It must be accessed from the rear, and the other attachments you order must allow room to access it from behind, near the pole).

  • contact Distributor for price

 

   JAC2015-K    Deluxe Large Locking Drawer with Rear KEY Lock, 2 Keys, Handle, Rollers, Metal Shelf, and Bracket

 

 

(photo not shown - same as above JAC2015) This drawer is the same as the one above, except that it has a rear KEY lock with 2 keys.  Keep in mind if you order this option that it must be accessed from the rear, and the other attachments you order must allow room to access it from behind, near the pole.

  • contact Distributor for price

JAC2007  Side Handle Bar

   JAC2007 - Side Handle Bar

 

Side Handle Bar for extra handling control of Cart. Handle is welded onto upper tray platform, so please order with initial Cart order. White powder-coated metal or metal with sponge grip, depending on inventory.

If you have other items attached to side tray platform, such as device holsters/brackets that take up space along the side, you may want to consider the Large Cart Handle (JAC2013) that attaches onto the pole instead (see photo below).

  • contact Distributor for price

JAC2013  Large Cart Handle (as an attachment on pole)

    JAC2013 - Large Cart Handle

 

Fastens as an Attachment to Cart Pole, underneath tray platform. Depending on what other attachments you have, this Handle can be positioned at any of 360 degrees around pole since it fastens via a ring. This type of Handle is a good option if you have, say, Custom Device Holsters affixed along one side of the upper tray platform, and a Writing Surface on the other side (which takes away any room for a side handle). Silver Metal.

 

(Photo shows Handle with Laptop Computer Platform with writing surface area, and 2 Small Deluxe Rear Key Locking Drawers.)

  • contact Distributor for price 

JAC2008  Replacement Caster for Cart

  JAC2008 - Replacement Rolling Caster

 

3" diameter Caster. (4" high from floor to attachment at base.)  High quality, long-wearing, durable, quiet. Rolls over irregular flooring, carpeting, and tile with ease. Large enough so won't get caught in elevator door thresholds.

  • contact Distributor for price

 img214.jpg

   JAC2008-BR - Replacement Caster with Brake

 

3" diameter Caster.  Caster with brake to stop wheel from rolling, so Cart stays stationary while in use or in storage. Use foot or hand to engage. Generally only need one per Cart to keep stationary.

  • contact Distributor for price

JAC9000W  Replacement Large Waste Basket w/Lid

   JAC9000W - Replacement Large Waste Basket w/Lid

 

Replacement Large (1-3/4) Gallon Round, Lidded Waste Container (only) - no bracket included. Use for non-contaminated, basic waste or miscellaneous supplies - not meant for use as a sharps disposal container.

  • contact Distributor for price

 

*Note:  Prices are subject to change without notice due to material and production costs.


 

Copyright 2011-2014,  JAC Medical Products Inc.